Cord Grip with internal thread, alum, 3/4" NPT, cable range .312 - .375 with mesh
Choose Favorites List

Cord Grip with internal thread, alum, 3/4" NPT, cable range .312 - .375 with mesh

0.0 out of 5
0 reviews | Write a Review
Item #: RSRF-2106-E

Remke Tuff-Seal Cord Grips with Internal Conduit Threads are UL Recognized and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants.


Made from machined aluminum, these cord grips offer the same features as our RSR Cord Grips and can be ordered with or without wire mesh attachments and accommodate conduit sizes from 3/8” to 1 ¼”. 


For applications known for their severe conditions – such as oil & gas, marine, food & chemical processing – these cord grips are available in nickel-plated aluminum.  Providing exceptional corrosion resistance and high wear resistance, nickel-plated connectors also feature an attractive finish similar to that of polished stainless steel.  These Tuff-Seal grips protect cable from damage and pull-out and are used in conduit hubs or knock-outs at the point where the electrical cable is to be terminated.


In the Tuff-Seal family of Cord Connectors & Wire Mesh Grips customization means you can mix and match from our extensive selection of special materials, wire mesh, components, threading, custom packaging, kitting and private labeling to develop the wire management Cord Connectors & Wire Mesh Grips that meets your specific needs. 

Special Materials

  • Aluminum - excellent durability and performance for most industrial applications
  • Nylon - lightweight and corrosion resistant
  • Steel - preferred in rugged industrial environments
  • Valox® - suitable for FDA-mandated washdown locations
  • Stainless Steel - the highest levels of durability in severely corrosive environments
  • Nickel-Plated Aluminum - protection against corrosion, friction & contamination with the appearance of polished stainless steel


Special Wire Mesh

  • Materials including, stainless steel and galvanized steel strands


Special Components/Options

  • Multiple hole bushings in a variety of hole combinations
  • Slit bushings
  • Various bushing materials including neoprene, silicone, Viton™, and buna-N
  • Locknuts
  • Embedded O-Rings
  • Application-specific requests

Special Threading

  • NPT
  • Pg
  • ISO (metric)
  • NPS
  • Applicaton-specific requests

Custom Packaging, Kitting and Private Labeling

Body Material Aluminum
Box Quantity 10
Bushing Holes 1
Bushing Material Neoprene
Cable Range .312 - .375
Category Cord Grips & Cable Connectors|Aluminum Connectors with Internal Conduit Threads|Aluminum Connectors with Internal Conduit Thread with Mesh,Cord Grips & Cable Connectors|All Cable Connectors & Cord Grips,Cord Grips & Cable Connectors|Lighting Connectors,Cord Grips & Cable Connectors|Anodized and Nickel-Plated Cord Grips
Clearance Hole (in) 1.141
Conduit Size 3/4
Connector Material Aluminum
Cord Grip Type Straight
Country of Origin United States
CSA Specification 28985
D Dimension (in) 1.81
E Dimension (in) 1.31
F Dimension (in) 1.33
Flammability Rating UL 94HB
Form Size 2
Hazardous Class/Division "Class 1, Div 2"
Inside Body Diameter / Body Bore 0.625
Max Cable Range over Jacket (in) 0.375
Maximum Knock Out Size (in) 1.141
Maximum Operating Temperature (C) 121
Maximum Operating Temperature (F) 250
Min Cable Range over Jacket (in) 0.312
Minimum Operating Temperature (C) -40
Minimum Operating Temperature (F) -40
Standard Package Quantity 10
Tab Info Temps,O-Ring,Ratings/Mtls,Cord/Cable Dia.,Certifications,Cable to Cord Grip,IP Ratings,Thread Specs,Approvals,Hazardous,IC Threads,Knockout,Flammability
Thread Size 3/4
Thread Type NPT
UL Specification E53599
UNSPC 39121311
UPC 785411401553
There are no reviews for this product yet. Be the first!

Write a Review

Required An asterisk is used to visually indicate that a field is required.
Would you recommend this product? Required Field