Rj45 Ethernet Connector - Cat6a 360° Shielded Field Wireable Modular Plug With Clasp
Choose Favorites List

Rj45 Ethernet Connector - Cat6a 360° Shielded Field Wireable Modular Plug With Clasp

0.0 out of 5
0 reviews | Write a Review
Item #: J00026A2001
$19.25

Short Description

This item is in high demand or is made to order, please contact sales via the form below, or by phone Monday-Friday 7:30 am-4:30 pm CST, at 847-541-3780.

Contact Sales

The 8-8 Class FA IP67 splice connection module offers transmission properties up to Class  FA acc. to ISO/IEC 11801 and is suitable for 8 wire installation and patch cables. AWG27-22 type shielded and unshielded cables with solid and stranded conductors of outer diameter of 5.5 - 9.0 mm can be connected with the 8-8 Class FA IP67. Suitable for PoE+ applications. This shielded connection module is ideal for use in confined spaces and can be field wired without the need for special tools.

Assembly video for Part #: J80060A0000 Product Information Sheet for Part#: J80060A0000
Assembly Instructions Product Specs

Long Description

RJ45 Ethernet Connector Modular Connector with Clasp Key Specifications:

  • Plug: IEC 60603-7-51 compliant
  • Life: ≥ 750 mating cycles
  • Contact Materials: Ni1.2Au0.8
  • Outer Diameter: 5.5 mm - 10.0 mm
  • Temperature Range: -40° C to 85° C
  • Reusable IPC: ≤ 4 cycles
  • Cable Strain Relief: AF13
  • PoE+ according to IEEE 802.3at
  • UL Listed

Click on Specifications tab below for more.

 

In the Tuff Link family of molded connectors & cordsets, customization means you can mix and match from our extensive selection of special materials, special hardware, special wiring, custom packaging, kitting and private labeling to develop the Molded Connector or Cordset that meets your specific needs. 

Special Materials

For coupling nuts & receptacle bodies you can choose from these five types of special materials:

  • Anodized Aluminum - for most industrial applications
  • Stainless Steel – durability in severely corrosive environments
  • Non-Metallic - best suited for damp locations
  • Nickel-Plated Brass - corrosion resistant & conforms to EMC requirements
  • Peek™ Polymers - ideal for applications with high temperatures or high pressure water. 

Special Materials

For overmolding and cable include the following:

  • Rubber for use in applications with extremes of temperatures, hot substrates like weld spatter, or where solvents, oil and coolants exist
  • Silicone that is best used in high temperatures
  • PVC which is best for general assembly applications
  • PUR for excellent abrasion resistance for high abuse areas
  • TPE that offers excellent chemical and abrasion resistance

 

Special Hardware

You can choose from a variety of custom shells, couplers or adapters. 

  • Remke offers five types of custom shells; flange mount, panel mount, back panel mount, P.C. type and SAE or metric threading. 
  • For couplers you can select either internally threaded, externally threaded or the ‘housing protective’ type where the coupler is threaded but covers the entire sensor for protection. 

 

Custom Cable Assemblies

 

Special Wiring

For custom products or specials, Remke offers several types of special wiring including: combination wiring where one side is parallel and the other is wired in series; interlocking circuit wiring; parallel wiring; series wiring; and wiring that is specified by a customer.

Custom Packaging, Kitting, and Private Labeling

Body Material Die-Cast Zinc
Cable Category 6A acc. to ISO/IEC 11801
Category Molded Connectors|All Molded Connectors,Molded Connectors|Ethernet Connectors
Contact Finish Material Ni1.2Au0.8
Cordset Configuration Straight
Cu Conductor Diameter - Core 1.0 - 1.6 mm
Cu Conductor Diameter - Solid 0.51 - 0.64 mm
Cu Conductor Diameter - Stranded 0.46 - 0.76 mm
Life ≥ 750 Mating Cycles
Outer Diameter 5.0 - 9.0 mm
Plug Compliance IEC 60603-7-51
Reusable IPC ≤ 4x
Shielding Housing Material Die-cast nickel-plated zinc
There are no reviews for this product yet. Be the first!

Write a Review

Required An asterisk is used to visually indicate that a field is required.
Would you recommend this product? Required Field