M12 Etherlink Connector, Cable Assembly, Male/Male, 6.6'
Choose Favorites List

M12 Etherlink Connector, Cable Assembly, Male/Male, 6.6'

0.0 out of 5
0 reviews | Write a Review
Item #: E04KM0066BA5


  • Factory Floor
  • High Flex/Continuous Motion such as Robot Arm Control
  • Automation Equipment
  • Near Motors, Generators and other ‘ Noise’ Generating Machines
  • Process Control
  • Conveyor Systems




  • Industrial Ethernet Systems
  • Sensor Connectors
  • Actuators
  • Panels & Cabinets
  • Automation Components

Remke M12 Etherlink Connectors feature our industrial-strength Micro-Link molded connectors with industry-standard D-coding for Ethernet and Fieldbus use.  M12 connectors are very sturdy despite their small size, and they provide a reliable connection even when subjected to shock or vibration.  Etherlink connectors offer IEC 11801:2002 Cat5 compliance with TPE cable that is shielded against EMC interference.  Easy-to-install TPE cable is also ideal for high flex applications in harsh environments where the highest degree of oil resistance and extended service life are essential


Rated IP 68 and NEMA 6P, Remke M12 Ethernet connectors support data rates up to a Gigabit and are able to withstand the most rugged industrial environmental conditions to ensure high Ethernet or Fieldbus network availability.  Quick and cost-effective to install and put into operation, these Remke M12 connectors are molded to shielded TPE cable for Cat5e data performance.  360˚ EMI shielding is important to all applications that depend on both high bandwidth and secure data transmission.


Features of Remke M12 Etherlink Connectors includes

  • Single and double-ended options including an RJ45 cable assembly
  • Available in male & female, straight and 90 degree configurations
  • Temperature range from -40˚C to +80˚C
  • Receptacles designed for conventional threaded connections to ensure reliable mating
  • 100% factory tested


RJ45 connectors are the most widely used connection technology for Ethernet systems.  However, for Ethernet networks that must comply with protection class IP 67 or 68, the M12 connector is best suited for those applications.  As both connectors offer Cat5 compliance, our double-ended cable assembly provides you with the IP 68 protection of a Remke M12 Micro-Link molded connector & the compact design of the RJ45 connector

In the Tuff Link family of molded connectors & cordsets, customization means you can mix and match from our extensive selection of special materials, special hardware, special wiring, custom packaging, kitting and private labeling to develop the Molded Connector or Cordset that meets your specific needs. 

Special Materials

For coupling nuts & receptacle bodies you can choose from these five types of special materials:

  • Anodized Aluminum - for most industrial applications
  • Stainless Steel – durability in severely corrosive environments
  • Non-Metallic - best suited for damp locations
  • Nickel-Plated Brass - corrosion resistant & conforms to EMC requirements
  • Peek™ Polymers - ideal for applications with high temperatures or high pressure water. 

Special Materials

For overmolding and cable include the following:

  • Rubber for use in applications with extremes of temperatures, hot substrates like weld spatter, or where solvents, oil and coolants exist
  • Silicone that is best used in high temperatures
  • PVC which is best for general assembly applications
  • PUR for excellent abrasion resistance for high abuse areas
  • TPE that offers excellent chemical and abrasion resistance


Special Hardware

You can choose from a variety of custom shells, couplers or adapters. 

  • Remke offers five types of custom shells; flange mount, panel mount, back panel mount, P.C. type and SAE or metric threading. 
  • For couplers you can select either internally threaded, externally threaded or the ‘housing protective’ type where the coupler is threaded but covers the entire sensor for protection. 


Custom Cable Assemblies


Special Wiring

For custom products or specials, Remke offers several types of special wiring including: combination wiring where one side is parallel and the other is wired in series; interlocking circuit wiring; parallel wiring; series wiring; and wiring that is specified by a customer.

Custom Packaging, Kitting, and Private Labeling

Body Material PVC
Cable Code Euro
Cable Jacket Color Black
Cable Jacket Material TPE
Cable Jacket Outer Diameter (in) 0.32
Cable Length (ft) 6.6
Category Molded Connectors|M12 Etherlink Connectors|Male-Male Cable Assemblies|Non-Shielded,Molded Connectors|All Molded Connectors
Conductor Color 1 White/Orange
Conductor Color 2 White/Green
Conductor Color 3 Orange
Conductor Color 4 Green
Connector Style MicroLink Ethernet
Contact Carrier Material Nylon
Contact Material "Brass, Gold Plated Over Nickel"
Contact Resistance (Micro Ohms) 5
Cordset Configuration Straight/Straight
Country of Origin United States
Coupling Nut Material Aluminum
Coupling Nut Plating Black Anodized
cRU Specification E165657
Current Rating (amps) 4
Insert Material Nylon
IP Rating IP67
Length (in) 2.02
Length (in) 2 1.85
Maximum Operating Temperature (C) 75
Maximum Operating Temperature (F) 167
Minimum Operating Temperature (C) -20
Minimum Operating Temperature (F) -4
NEMA Rating 6P
O-Ring Material Nitrile Rubber
Poles 4
Standard Package Quantity 1
Tab Info IP Ratings,CRT,TL APP,Cable Jacket Mtl,ROHS,Cable Cross,Knockout Dim,Coupling Nut Mtl
Thread 1 M12X1
Thread 2 M12X1
UNSPC 32151904
UPC 785411038339
Voltage Rating (AC) 125
Voltage Rating (DC) 125
Width (in) 0.57
Width (in) 2 0.57
Wire Gauge 24 AWG
Wiring Color Code Ethernet
There are no reviews for this product yet. Be the first!

Write a Review

Required An asterisk is used to visually indicate that a field is required.
Would you recommend this product? Required Field