Mouse over to zoom
Industrial-Strength Molded Mini-Link Cordsets Deliver Better Reliability in Demanding Applications
Mini-Link™ Molded Cordsets and Cable Assemblies are ideally suited for heavy-duty applications where flexibility and resistance to stress, abuse and harsh conditions are critical.
Remke's Rated IP 68 and NEMA 6 to deliver the reliability and durability your job demands. where reliability and durability are critical.
The right options to meet your specs are available in stock and ready for quick shipping.
- PVC for general applications
- Rubber and Silicone for temperature & flexing concerns
- TPE is also available for applications with chemicals and corrosives
- Receptacles and wire management accessories
- Mini-attachable connectors
Remke Molded Cordsets and Cable Connectors are made in the USA and shipped fast!
Call Toll Free
- Ordering Matrix
- Engineered Solutions
Mini-Link Connectors and Cordsets for Heavy-Duty Performance in Harsh Environments
Mini-Link Molded Connectors deliver the secure connections you need for demanding applications.
Remke’s line includes a variety of connectors, cable assemblies, cordsets and receptacles to meet your exact specs.
- Male & female connectors
- Straight and 90-degree configurations
- 2 thru 12-Pin connectors
- NEMA 6P and IP 68 protection
- Nickel coated then gold-plated contacts for enhanced corrosion resistance & conductivity
- Hard Service SOOW, SJOOW or STOW cable configurations
- Pins and contacts are crimped onto wires with eight indentations assuring secure terminations
- Connectors meet or exceed UL, CSA, NEMA, SAE, IEC and automotive specifications.
- Integral strain relief and plated coupling nuts
Attachable Mini-Link Connectors
Attachable Mini-Link connectors provide essential flexibility for wiring in the field, on demand. In applications where it is difficult to design or plan wiring due to changing conditions, using Mini-Link cables with attachable molded connectors that can be wired on site is the answer!
Typical applications for using Mini-Link Molded Connectors include:
- Sensors on conveyors
- Automated assembly equipment
- Packaging equipment
- Robotics equipment
- Bus systems
- Transportation equipment.
Other products typically used with Mini-Link connectors include 12 and 18mm proximity sensors, limit switches, photoelectric switches, solenoids & hydraulic valves, foot operated switches, power tools, cranes/hoists/and their controls.
Keep in touch with evolving trends and get ahead of the rest!
Anatomy of a Part Number
Number of Poles
02 = 2 Pole
03 = 3 Pole
04 = 4 Pole
05 = 5 Pole
06 = 6 Pole
A = Female Straight
C = Female 90 Degree
E = Male Straight*
F = Male 90 Degree*
K = Male/Female (STRT/STRT)*
L = Male/Female (STRT/90D)*
M = Male/Female (90D/STRT)*
N = Male/Female (90D/90D)*
O = Female/Female
P = Male Recpt. 1/2" NPT
R = Male Recpt. 1/4" NPT
S = Female Recpt. 1/4" NPT+
T = Male Recpt. M14 X 1
+ = Internal Threads
* = Male Has External Threads
Note: Other connector styles available. Consult Factory.
Assembly Length (FT.)
1st Digit is 100 x Length
2nd Digit is 10 x Length
3rd Digit is 1 x Length
4th Digit is .1 x Length
"Ex: 0005 is 1/2 Ft."
"0050 is 5 Ft."
"0500 is 50 Ft."
"5000 is 500 Ft."
Dual Key Cable Codes
AA = # 22 AWG TPE Shielded (Auto CC)
AK = # 22 AWG PUR w/braid (Auto CC)
AQ = # 18 AWG TPE (Auto CC)
C = # 18 AWG Rubber SJOOW (Auto CC)
E = # 18 AWG PVC (Auto CC)
G = # 22 AWG PVC w/braid (Auto CC)
K = # 22 AWG PUR (Auto CC)
T = # 22 AWG PVC w/o braid (Auto CC)
For Receptacles Only
N = # 18/1C PVC
P = # 22/1C PVC
Note: (Auto CC) applies to Dual Key Devices. Other cable codes available - consult factory
Single Key Cable Codes
AB = # 22 AWG TPE Shielded (Euro CC)
AL - # 22 AWG PUR w/braid (Euro CC)
AR = #18 AWG TPE (Euro CC)
D = # 18 AWG Rubber SJOOW (Euro CC)
F = # 18 AWG PVC (Euro CC)
H = # 22 AWG PVC w/braid (Euro CC)
J = # 22 AWG PVC w/o braid (Euro CC)
L = # 22 AWG PUR (Euro CC)
For Receptacles Only
N = # 18/1C PVC
P = # 22/1C PVC
Note: (Euro CC) applies to single key (M12) devices. Other cable types available - consult factory.
Coupling or Shell Options
1= Stainless Steel
9 = Nickel-Plated Brass
N = Non-Metallic
Note: Leave Blank for Std. Materials
Meeting the Needs of a Single Customer
When the product you need doesn’t exist in the standard line talk to us.
Remke Engineered Solutions is entirely focused on meeting the needs of a single customer. Developing application-specific solutions that meet your precise needs is Job 1 and no order is ‘too small’.
Think of our broad spectrum of services like a sliding scale ….. from simple on the left to complex on the right --- from specials on the left to adaptations & variations in the middle to full-scale engineered custom products on the right. Wherever your specific need falls on that spectrum will be the Remke Engineered Solution that is right for your application.
All our Engineered Solutions customers receive:
- Free product design assistance
- Rapid Prototyping
- Design, engineering & manufacturing in the USA
- Quick turnaround in as little as days (based on complexity)
- Versatile & innovative solutions
- Small or large volume manufacturing for any product we design
- 100% product testing
- Compliance Certification – UL, CSA, TUV, CE, etc. (where applicable)
Let us relieve the burden of developing an idea into a manufactured product. Depending on the level of modification required we can fast-track design & create prototypes within days. Put your connectivity problems into the hands of the Remke Engineered Solutions team.